datasheetbank_Logo
Технический паспорт Поисковая и бесплатно техническое описание Скачать
HOME  >>>  Cypress Semiconductor  >>> CY7C68000 PDF

CY7C68000 Даташит - Cypress Semiconductor

CY7C68000 image

Номер в каталоге
CY7C68000

Компоненты Описание

Other PDF
  2004  

PDF
DOWNLOAD     

page
14 Pages

File Size
234.2 kB

производитель
Cypress
Cypress Semiconductor Cypress

EZ-USB TX2™ Features
The Cypress EZ-USB TX2™ is a Universal Serial Bus (USB) specification revision 2.0 transceiver, serial/deserializer, to a parallel interface of either 16 bits at 30 MHz or eight bits at 60 MHz. The TX2 provides a high-speed physical layer interface that operates at the maximum allowable USB 2.0 bandwidth. This allows the system designer to keep the complex high speed analog USB components external to the digital ASIC which decreases development time and associated risk. A standard interface is provided that is USB 2.0-certified and is compliant with Transceiver Macrocell Interface (UTMI) specification version 1.05 dated 3/29/01. Two packages are defined for the family: 56-pin SSOP and 56-pin QFN.

The function block diagram is shown in Figure 1-1. The features of the EX-USB TX2 are:
• UTMI-compliant/USB-2.0-certified for device operation
• Operates in both USB 2.0 high speed (HS), 480 Mbits/second, and full speed (FS), 12 Mbits/second
• Serial-to-parallel and parallel-to-serial conversions
• 8-bit unidirectional, 8-bit bidirectional, or 16-bit bidirectional external data interface
• Synchronous field and EOP detection on receive packets
• Synchronous field and EOP generation on transmit packets
• Data and clock recovery from the USB serial stream
• Bit stuffing/unstuffing; bit stuff error detection
• Staging register to manage data rate variation due to bit stuffing/unstuffing
• 16-bit 30-MHz, and 8-bit 60-MHz parallel interface
• Ability to switch between FS and HS terminations and signaling
• Supports detection of USB reset, suspend, and resume
• Supports HS identification and detection as defined by the USB 2.0 Specification
• Supports transmission of resume signaling
• 3.3 V operation
• Two package options—56-pin QFN, and 56-pin SSOP
• All required terminations, including 1.5K-ohm pull up on DPLUS, are internal to the chip
• Supports USB 2.0 test modes


APPLICATIONs
• DSL modems
• ATA interface
• Memory card readers
• Legacy conversion devices
• Cameras
• Scanners
• Home PNA
• Wireless LAN
• MP3 players
• Networking

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Номер в каталоге
Компоненты Описание
PDF
производитель
TX2™ USB 2.0 UTMI Transceiver
Cypress Semiconductor
MoBL-USB™ TX2 USB 2.0 UTMI Transceiver ( Rev : 2008 )
Cypress Semiconductor
MoBL-USB™ TX2 USB 2.0 UTMI Transceiver
Cypress Semiconductor
3.3 V, USB 2.0 UTMI compliant transceiver
Genesys Logic
USB 2.0 UTMI Compliant Transceiver IP Core
GENESYS LOGIC
USB 2.0 transceiver
KAWASAKI MICROELECTRONICS
USB 2.0 transceiver
Unspecified
MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver
Cypress Semiconductor
MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver ( Rev : 2009 )
Cypress Semiconductor
MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver ( Rev : 2010 )
Cypress Semiconductor

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Russianрусский Spanishespañol

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]