Features
The Cypress MoBL-USB™ TX2UL is a low voltage high speed (HS) USB 2.0 UTMI+ Low Pin Interface (ULPI) Transceiver. The TX2UL is specifically designed for mobile handset applications by offering tiny package options and low power consumption.
■ USB 2.0 Full Speed and High Speed compliant transceiver
■ Multi range (1.8 V to 3.3 V) I/O voltages
■ Fully compliant ULPI link interface
■ 8-bit SDR ULPI data path
■ UTMI+ level 0 support
■ Support USB device mode only
■ Integrated oscillator
■ Integrated phase locked loop (PLL) – 13, 19.2, 24, or 26 MHz reference
■ Integrated USB pull-up and termination resistors
■ 3.0 V to 5.775 V VBATT input
■ Chip select pin
■ Single ended device RESET input
■ UART pass through mode
■ ESD compliance:
   ❐ JESD22-A114D 8 kV Contact human body model (HBM) for DP, DM, and VSS pins
   ❐ IEC61000 - 4-2 8 kV contact discharge
   ❐ IEC61000 - 4-2 15 kV air discharge
■ Support for industrial temperature range: (-40 C to 85 C)
■ Low power consumption for mobile applications:
   ❐ 5 µA nominal sleep mode
   ❐ 30 mA nominal active HS transfer
■ Small package for mobile applications:
   ❐ 2.14 x 1.76 mm 20-pin WLCSP 0.4 mm pitch
   ❐ 4 x 4 mm 24-pin QFN

APPLICATIONs
■ Mobile phones
■ PDAs
■ Portable media players (PMPs)
■ DTV applications
■ Portable GPS units