RV5C386A-E2 Просмотр технического описания (PDF) - RICOH Co.,Ltd.

Номер в каталоге

Компоненты Описание

Список матч

RV5C386A-E2

I2C-Bus Real-Time Clock ICs with Voltage Monitoring Function

RICOH Co.,Ltd. 

12345

Preliminary

9.Jun.99

I2C-Bus Real-Time Clock ICs

with Voltage Monitoring Function

RV5C386A

1. OUTLINE

The RV5C386A is a CMOS real-time clock IC connected to the CPU by two signal lines, SCL and SDA, and

configured to perform serial transmission of time and calendar data to the CPU. The periodic interrupt circuit

is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month.

The 2 alarm interrupt circuits generate interrupt signals at preset times. As the oscillation circuit is driven

under constant voltage, fluctuation of the oscillator frequency due to supply voltage is small, and the time

keeping current is small (TYP. 0.35 µA at 3 volts). The oscillation halt sensing circuit can be used to judge

the validity of internal data in such events as power-on; The supply voltage monitoring circuit is configured to

record a drop in supply voltage below two selectable supply voltage monitoring threshold settings. The 32-

kHz clock output function (CMOS output) is intended to output sub-clock pulses for the external

microcomputer. The 32-kHz clock output can be disabled by certain input pin. The oscillation adjustment

circuit is intended to adjust time counts with high precision by correcting deviations in the oscillation frequency

of the crystal oscillator. This model comes in an ultra-compact SSOP10G (Pin Pitch 0.5mm, Height1.2mm,

4.0mm×2.9mm).

2. FEATURES

• Timekeeping supply voltage ranging from 1.45 to 5.5V

• Low power consumption

0.35µA TYP (0.8µA MAX) at VDD=3V

• Only two signal lines (SCL and SDA) required for connection to the CPU.

( I2C-Bus Interface, 400kHz at VDD≥2.5V, address 7bits)

• Time counters (counting hours, minutes, and seconds) and calendar counters (counting years, months, days,

and weeks) (in BCD format)

• 1900/2000 identification bit for Year 2000 compliance

• Interrupt circuit configured to generate interrupt signals (with interrupts ranging from 0.5 seconds to 1 month)

to the CPU and provided with an interrupt flag and an interrupt halt

• 2 alarm interrupt circuits (Alarm_W for week, hour, and minute alarm settings and Alarm_D for hour and

minute alarm settings)

• 32-kHz clock circuit (CMOS output, equipped with a control pin)

• Oscillation halt sensing circuit which can be used to judge the validity of internal data

• Supply voltage monitoring circuit with two supply voltage monitoring threshold settings

• Automatic identification of leap years up to the year 2099

• Selectable 12-hour and 24-hour mode settings • Built-in oscillation stabilization capacitors (CG and CD)

• High precision oscillation adjustment circuit

• CMOS process

• Ultra-compact SSOP10G

*) I2C-Bus is a trademark of PHILIPS N.V.

Purchase of I2C-Bus components of Ricoh Company, LTD. conveys a license under the Philips I2C Patent

Rights to use these components in an I2C system, provided that the system comforms to the I2C standard

Specification as definded by Philips.

12345

-1-

Share Link: