datasheetbank_Logo
Технический паспорт Поисковая и бесплатно техническое описание Скачать

PTN3460 Просмотр технического описания (PDF) - NXP Semiconductors.

Номер в каталоге
Компоненты Описание
Список матч
PTN3460
NXP
NXP Semiconductors. NXP
PTN3460 Datasheet PDF : 32 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
NXP Semiconductors
PTN3460
eDP to LVDS bridge IC
2.2 DisplayPort receiver features
Compliant to DP v1.2 and v1.1a
Compliant to eDP v1.2 and v1.1
Supports Main Link operation with 1 or 2 lanes (default mode is 2-lane operation)
Supports Main Link rate: Reduced Bit Rate (1.62 Gbit/s) and High Bit Rate (2.7 Gbit/s)
Supports 1 Mbit/s AUX channel
Supports Native AUX and I2C-over-AUX transactions
Supports down spreading to minimize EMI
Integrated 50 termination resistors provide impedance matching on both Main Link
lanes and AUX channel
High performance Auto Receive Equalization enabling optimal channel compensation,
device placement flexibility and power saving at CPU/GPU
Supports eDP authentication options: Alternate Scrambler Seed Reset (ASSR) and
Alternate Framing
Supports Fast Link training and Full Link training
Supports DisplayPort symbol error rate measurements
2.3 LVDS transmitter features
Compatible with ANSI/TIA/EIA-644-A-2001 standard
Supports RGB data packing as per JEIDA and VESA data formats
Supports pixel clock frequency from 25 MHz to 112 MHz
Supports single LVDS bus operation up to 112 mega pixels per second
Supports dual LVDS bus operation up to 224 mega pixels per second
Supports color depth options: 18 bpp, 24 bpp
Programmable center spreading of pixel clock frequency to minimize EMI
Supports 1920 1200 at 60 Hz resolution in dual LVDS bus mode
Programmable LVDS signal swing to pre-compensate for channel attenuation or allow
for power saving
Supports PCB routing flexibility by programming for:
LVDS bus swapping
Channel swapping
Differential signal pair swapping
Supports Data Enable polarity programming
DDC control for EDID ROM access – I2C-bus interface up to 400 kbit/s
2.4 Control and system features
Device programmability
Multi-level configuration pins enabling wider choice
I2C-bus slave interface supporting Standard-mode (100 kbit/s) and
Fast-mode (400 kbit/s)
Power management
Low-power state: DP AUX command-based Low-power mode (SET POWER)
Deep power-saving state via a dedicated pin
PTN3460
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 12 March 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
2 of 32

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]