GENERAL DESCRIPTION
The W49L201 is a 2-megabit, 3.3-volt only CMOS flash memory organized as 128K ´ 16 bits. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The unique cell architecture of the W49L201 results in fast program/erase operations with extremely low current consumption (compared to other comparable 3.3-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.
FEATURES
· Single 3.3-volt operations:
- 3.3-volt Read/Erase/Program
· Fast Program operation:
- Word-by-Word programming: 50 mS (max.)
· Fast Erase operation: 100 mS (typ.)
· Fast Read access time: 70/90 nS
· Endurance: 10K cycles (typ.)
· Ten-year data retention
· Hardware data protection
· Sector configuration
- One 8K words Boot Block with lockout protection
- Two 8K words Parameter Blocks
- One 104K words (208K bytes) Main Memory Array Blocks
· Low power consumption
- Active current: 15 mA (typ.)
- Standby current: 10 mA (typ.)
· Automatic program and erase timing with internal VPP generation
· End of program or erase detection
- Toggle bit
- Data polling
· Latched address and data
· TTL compatible I/O
· JEDEC standard word-wide pinouts
· Available packages: 44-pin SOP, 48-pin TSOP