The TB2932HQ is 4ch audio amplifier for car audio application. This IC can generate high power, high quality sound output, POUT MAX = 49 W, using a pure complementary P-ch and N-ch DMOS output stage.
The built-in self diagnosis function which is included can be controlled via I2C BUS.
In addition, stand-by and mute function, and various protecton feature are included.

FEATUREs
• High power output
: POUT MAX (1) = 49 W (typ.)
(VCC = 15.2 V, f = 1 kHz, JEITA max, RL = 4 Ω)
: POUT MAX (2) = 43 W (typ.)
(VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω)
: POUT MAX (3) = 70 W (typ.)
(VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 2 Ω)
: POUT (1) = 27 W (typ.)
(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
: POUT (2) = 23 W (typ.)
(VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
: POUT (3) = 45 W (typ.)
(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 2 Ω)
• Low distortion ratio: THD = 0.007% (typ.)
(VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω)
• Low noise: VNO = 60 μVrms (typ.)
(VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz to 20 kHz, RL = 4 Ω)
• Built in stand by & muting function: controlled via I2C Bus (26/12dB)
• Built in clipping detection (pin 4)
• Built in I2C Bus for stand-by, mute, voltage gain control, self diagnosis: Output short detection, offset detection, tweeter or speaker open detection (pin 22 and 25)
• Built-in various protection circuits
Thermal shut down, over-voltage, out to GND, out to VCC, out to out short circuit
• Operating supply voltage: VCC (opr) = 8 to 18 V (RL = 4 Ω)
VCC (opr) = 8 to 16 V (RL = 2 Ω)