The TA8263BH is 4 ch BTL audio power amplifier for car audio application. This IC can generate more high power: POUTMAX = 43 W as it is included the pure complementary PNP and NPN transistor output stage.
It is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in stand-by function, muting function, and diagnosis circuit which can detect output to VCC/GND short, output offset voltage and over voltage input mode. Additionally, the AUX amplifier and various kind of protector for car audio use are built-in.

FEATUREs
High power : POUTMAX (1) = 43 W (typ.)
(VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω)
: POUTMAX (2) = 40 W (typ.)
(VCC = 13.7 V, f = 1 kHz, JEITA max, RL = 4 Ω)
: POUT (1) = 28 W (typ.)
(VCC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
: POUT (2) = 24 W (typ.)
(VCC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
Built-in diagnosis circuit (pin 25)
Low distortion ratio: THD = 0.02% (typ.)
   (VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω)
Low noise: VNO = 0.10 mVrms (typ.)
   (VCC = 13.2 V, Rg = 0 Ω, GV = 26dB, BW = 20 Hz~20 kHz)
Built-in stand-by switch function (pin 4)
Built-in muting function (pin 22)
Built-in AUX amplifier from single input to 4 channels output (pin 16)
Built-in various protection circuit
: Thermal shut down, over voltage, out to GND, out to VCC, out to out short
Operating supply voltage: VCC (opr) = 9~18 V