datasheetbank_Logo
Технический паспорт Поисковая и бесплатно техническое описание Скачать
HOME  >>>  STMicroelectronics  >>> STULPI01A PDF

STULPI01A Даташит - STMicroelectronics

STULPI01A image

Номер в каталоге
STULPI01A

Компоненты Описание

Other PDF
  no available.

PDF
DOWNLOAD     

page
44 Pages

File Size
518.4 kB

производитель
ST-Microelectronics
STMicroelectronics ST-Microelectronics

Description
The STULPI01 is a high speed USB 2.0 transceiver compliant with ULPI (UTMI+ low pin interface) and OTG (On-The-Go) specifications, providing a complete physical layer solution for any high speed USB host, device or OTG dual role core. It allows USB ASICs to interface with the physical layer of the USB through a 12-pin interface. It contains VBUS comparators, ID line detector, USB differential driver and receivers and complete ULPI register map and interrupt generator. The STULPI01 transceiver is suitable for mobile applications and battery powered devices because of its low power consumption, power down operating mode and minimal die/package dimensions.


FEATUREs
■ USB-IF high speed certified to the Universal Serial Bus specification Rev 2.0.
■ Meets the requirements of the Universal Serial Bus specification revision 2.0, On-The-Go supplement to the USB 2.0 specification 1.0a and ULPI transceiver specification 1.1.
■ Standard ULPI (UTMI+ low pin interface) 1.1 digital interface.
■ Fully compliant with ULPI 1.1 register set.
■ External square wave clock with 1V8VIO amplitude must be applied to oscillator input XI.
■ Supports 480 Mbit/s high speed, 12 Mbit/s full speed and 1.5 Mbit/s low speed modes of operation.
■ Supports 2.7 V UART mode.
■ Supports session request protocol (SRP) and host negotiation protocol (HNP) for dual-role device features.
■ Ability to control external charge pump for higher VBUS currents.
■ Single supply, +3 V to +4.5 V voltage range.
■ Integrated dual voltage regulator to supply internal circuits with stable 3.3 V and 1.2 V.
■ Integrated over current detector.
■ Integrated HS termination and FS/LS/OTG pull-up/pull-down resistors.
■ Integrated USB 2.0 “short-circuit withstand” protection.
■ Power down mode with very low power consumption for battery-powered devices.
■ Ideal for system ASICs with built-in USB host, device or OTG cores.
■ Available in µTFBGA36 RoHS package.
■ -40 °C to 85 °C operating temperature range.


APPLICATIONs
■ Mobile phones
■ PDAs
■ MP3 players
■ Digital still cameras
■ Set top box
■ Portable navigation devices

 

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

Номер в каталоге
Компоненты Описание
PDF
производитель
USB 2.0 On-The-Go Controller
GENESYS LOGIC
MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver ( Rev : 2009 )
Cypress Semiconductor
MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver
Cypress Semiconductor
MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver ( Rev : 2010 )
Cypress Semiconductor
USB On-the-Go Charge Pump with Switchable Pullup/Pulldown Resistors
Maxim Integrated
Switching Power Manager with USB On-The-Go And Overvoltage Protection
Linear Technology
Switching Power Manager with USB On-the-Go + Triple Step-Down DC/DCs
Linear Technology
Switching Power Manager with USB On-the-Go + Triple Step-Down DC/DCs ( Rev : RevB )
Linear Technology
Hi-Speed USB Transceiver with 1.8V ULPI Interface - 13MHz Reference Clock ( Rev : 2007 )
SMSC -> Microchip
Hi-Speed USB Transceiver with 1.8V ULPI Interface - 13MHz Reference Clock
SMSC -> Microchip

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Russianрусский Spanishespañol

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]