FEATURES
• Compact, high-capacity, and
    resistant to inductive loads
    It can control an inductive load with
    inrush current of 80 A and steady
    state current of 20 A.
• Excellent contact welding resistance
    High contact pressure, a forced opening
    mechanism, and a forced wiping
    mechanism realizes an excellent contact
    welding resistance.
• High breakdown voltage and surge
    resistant relay
    More than 6.4 mm .252 inch maintained
    for the insulation distance between
    contacts and coil, and the breakdown
    voltage between contacts and coil is
    5,000 V for 1 minute. In addition, the
    surge resistance between contacts and
    coil is greater than 10,000 V.
• Resistant to external force
    An absorber mechanism is used on the
    load terminals, giving a large
    improvement in characteristics variations
    caused by the external force during
    FASTON placement/removal.
• Flux resistance mechanism
    The terminal area is plugged with resin to
    prevent flux seepage during PCB
    mounting. (TMP type)
• Conforms to the various safety
    standards
    UL, CSA, VDE available
• The line up can support economical
    mounting methods.
    The relay are equipped with a drive
    terminal (coil terminal) on one side for
    PCBs, and a load terminal (tab terminal
    #250) on the reverse side. The line up
    includes the TM type which can be
    attached directly to the PCB composing a
    drive circuit, and the TMP type which
    supports economical wiring. The TMP
    type can also be directly attached, and a
    high capacity load can be wired to the tab
    terminal.
   
TYPICAL APPLICATIONS
• Compressor and heater control in
    air conditioners
• Power control in hot air type heaters
• Magnetron control in microwave
    ovens
• Lamp and motor control in
    OA equipment such as copiers and
    facsimiles.