FEATURES
• Compact, high-capacity, and resistant to inductive loads
   It can control an inductive load with
   inrush current of 80 A and steady
   state current of 20 A.
• Excellent contact welding resistance
   High contact pressure, a forced opening
   mechanism, and a forced wiping
   mechanism realizes an excellent contact
   welding resistance.
• High breakdown voltage and surge resistant relay
   More than 6.4 mm .252 inch maintained
   for the insulation distance between
   contacts and coil, and the breakdown
   voltage between contacts and coil is
   5,000 V for 1 minute. In addition, the
   surge resistance between contacts and
   coil is greater than 10,000 V.
• Resistant to external force
   An absorber mechanism is used on the
   load terminals, giving a large
   improvement in characteristics variations
   caused by the external force during
   FASTON placement/removal.
• Flux resistance mechanism
   The terminal area is plugged with resin to
   prevent flux seepage during PCB
   mounting. (TMP type)
• Conforms to the various safety standards
   UL, CSA, VDE available
• The line up can support economical mounting methods.
   The relay are equipped with a drive
   terminal (coil terminal) on one side for
   PCBs, and a load terminal (tab terminal
   #250) on the reverse side. The line up
   includes the TM type which can be
   attached directly to the PCB composing a
   drive circuit, and the TMP type which
   supports economical wiring. The TMP
   type can also be directly attached, and a
   high capacity load can be wired to the tab
   terminal.

TYPICAL APPLICATIONS
• Compressor and heater control in air conditioners
• Power control in hot air type heaters
• Magnetron control in microwave ovens
• Lamp and motor control in
   OA equipment such as copiers and facsimiles.