ADM Codec
CMX649
POWER CONTROL 1 Register ($64)
AAF Power
This bit is reserved and should be set to a logic 0
Control
(Bit 7)
AAF Power
Control
(Bit 6)
This bit is dedicated to power/current control for the AAF. Note: It is necessary to
keep the power level set to one of the “ON” settings when the AAF is bypassed.
Bit 7
0
0
Bit 6
0
1
Power Level Setting
Power down (Off).
Normal operation.
AIF Power
Control
(Bit 5)
This bit is reserved and should be set to a logic 0.
AIF Power
Control
(Bit 4)
This bit is dedicated to power/current control for the AIF and the Sidetone DCA.
Note: It is necessary to keep the power level set to one of the “ON” settings when
the AIF is bypassed.
Bit 5
0
0
Bit 4
0
1
Power Level Setting
Power down (Off).
Normal operation.
Encode DAC
These bits are dedicated to power/current control for the Encode DAC.
Power Control
(Bits 3 – 2)
Bit 3 Bit 2
Power Level Setting
0
0 Power down (Off).
0
1 Lowest power (for bit rates less than 32kbps).
1
0 Low power (for bit rates between 32kbps and 64kbps).
1
1 Normal operation (for bit rates greater than 64kbps).
Decode DAC
These bits are dedicated to power/current control for the Decode DAC.
Power Control
(Bits 1 – 0)
Bit 1 Bit 0
Power Level Setting
0
0 Power down (Off).
0
1 Lowest power (for bit rates less than 32kbps).
1
0 Low power (for bit rates between 32kbps and 64kbps).
1
1 Normal operation (for bit rates greater than 64kbps).
© 2003 CML Microsystems Plc
19
D/649/2