DESCRIPSION 
   The TJ2110X is single-channel High-Side MOSFET switch optimized for general-purpose power distribution requiring circuit protection. 
   The TJ2110 series support the following USB requirements. The TJ2110 series supply up to 1.0A as required by USB downstream devices. Switch’s low on-resistance meets USB voltage drop requirement. Fault current is limited to typically 2.2A. Flag output indicate fault condition to the local USB controller. Soft-start prevents the transient voltage drop on the upstream port that can occur when the switch is enabled in bus-powered applications.

FEATURES
● 3.0V to 5.5V Operating Range
● 1.0A Continuous Current
● 2.2A Accurate Current limiting
● 1.6A Short Circuit Current
● 80uA Typical On-State Supply Current
● 1uA Maximum Standby Supply Current
● Independent open-drain fault flag pins
● Thermal Shutdown Protection
● Under Voltage Lockout(UVLO)
● TJ2110H : Active High version
● TJ2110L : Active Low version
● UL Recognized. UL File No. E347996

APPLICATION
● USB Peripherals
● General Purpose Power Switching
● ACPI Power Distribution
● Notebook PCs
● PDAs
● Hot Plug-in Power Supplies