General Description
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification, Rev. 1.3 and 2.0.The IC furthermore can be used in ISO9141 systems.

FEATUREs
❐ Compatible to LIN Specification Version 1.3 and 2.0
❐ Compatible to ISO9141 functions
❐ Baud rate up to 20 kBaud
❐ Operating voltage VS = 7 to 18 V
❐ Low current consumption of typ. 24µA
❐ Wake-up via LIN bus traffic
❐ Slew rate control for good EME behavior
❐ High EMI immunity
❐ Fully integrated receiver filter
❐ Bus terminals proof against short-circuits and transients in the automotive environment
❐ High impedance BUS pin in case of loss of ground and undervoltage condition
❐ High signal symmetry for using in RC – based slave nodes up to 2% clock tolerance
❐ Automotive Temperature Range of –40°C to 125°C
❐ CMOS compatible interface to microcontroller
❐ Thermal overload protection
❐ Load dump protection (40V)
❐ ±4kV ESD protection
❐ Small SOIC8 package