GENERAL DESCRIPTION
The SSM4567 is a digital input Class-D power amplifier that includes an integrated boost converter, allowing higher output power than with a normal battery supply. This means that maximum output power is constant across the battery voltage range. The SSM4567 is ideal for power sensitive applications where system noise can corrupt the small analog signal sent to the amplifier, such as mobile phones, tablets, and portable media players.
FEATURES
Filterless Class-D amplifier with spread-spectrum Σ-Δ
modulation with integrated boost regulator (5.1 V)
Digitized output of output voltage, output current, and VBAT
supply voltage
Integrated boost regulator
Multiple serial data formats
PDM input/output
TDM slave with support for up to 8 chips on a single bus
I2S or left justified slave
Multichip I2S with support for up to 4 chips on one I2S bus
8 kHz to 192 kHz PCM sample rates
2.048 to 6.14 MHz PDM input sample rates
Configurable via I2C control, TDM control, or PDM patterns
Standalone control modes
2.5 W into 4 Ω load and 1.42 W into 8 Ω load at 3.6 V supply
with <1% total harmonic distortion plus noise (THD + N)
Available in 19-ball, 1.74 mm × 2.1 mm, 0.4 mm pitch WLCSP
89.7% system efficiency into 8 Ω at 1 W, VBAT = 3.6 V
Output noise: 21.7 μV rms, A-weighted
THD + N: 0.025% at 1 kHz, 500 mW output power
PSSR: 90 dB at 217 Hz, with dither input
72 dB signal-to-noise ratio (SNR) on output current sensing
and 77 dB SNR on voltage sensing
Quiescent power consumption: 19.8 mW
Pop-and-click suppression
Flexible battery monitoring AGC
Short-circuit protection for boost and Class-D outputs and
thermal protection with automatic recovery
Smart power-down when PDM stop condition
or no clock input detected
DC blocking high-pass filter and static input DC protection
for PDM input
Selectable ultralow EMI emissions and low latency modes
APPLICATIONS
Mobile handsets
Tablets
Portable media players