[SOLOMON]

GENERAL DESCRIPTION
The SSD1905 is a graphics controller with built-in 80Kbyte SRAM display buffer, supporting color and mono LCD. The SSD1905 can support a wide range of active and passive panels, and interface with various CPUs. The advanced design, together with integration of memory and timing circuits make a low cost, low power, single chip solution to meet the handheld devices or appliances market needs, such as Pocket/Palm-size PCs and mobile communication devices.

FEATURES
Integrated Display Buffer
• Embedded 80K byte SRAM display buffer.

Microcontroller Interface
• Directly interfaces to :
   Generic #1 bus interface with WAIT# signal
   Generic #2 bus interface with WAIT# signal
   Motorola MC68K
   Motorola MC68EZ328/MC68VZ328 DragonBall
   Hitachi SH-3
   Hitachi SH-4
• 8-bit processor support with “glue logic”.
• “Fixed” and low-latency CPU access times.
• Registers are memory-mapped with dedicated M/R# input to select between memory and register address space.
• The contiguous 80K byte display buffer is directly accessible through the 17-bit address bus.

LCD Panel Support
• 4/8-bit monochrome STN interface.
• 4/8-bit color STN interface.
• 9/12/18-bit Active Matrix TFT interface.
• Direct support for 18-bit Sharp HR-TFT interface (160x160, 320x240).

Display Modes
• 1/2/4/8/16 bit-per-pixel (bpp) color depths.
• Up to 64 gray shades using Frame Rate Control (FRC) and dithering on monochrome passive LCD panels.
• Up to 256k colors on passive STN panels.
• Up to 256k colors on active matrix LCD panels.
• Resolution examples :
   320x240 at a color depth of 8 bpp
   160x160 at a color depth of 16 bpp
   160x240 at a color depth of 16 bpp

Display Features
• Display Rotate Mode : 90°, 180°, 270° counter-clockwise hardware rotation of display image.
• Virtual display support : displays image larger than the panel size through the use of panning and scrolling.
• Floating Window Mode : displays a variable size window overlaid on background image.
• 2 Hardware Cursors (for 4/8/16 bpp) : simultaneously displays two cursors overlaid on background image.
• Double Buffering/Multi-pages: provides smooth animation and instantaneous screen updates.

Clock Source
• Two clock inputs: CLKI and AUXCLK. It is possible to use one clock input only.
• Bus clock (BCLK) is derived from CLKI, can be internally divided by 2, 3, or 4.
• Memory clock (MCLK) is derived from BCLK. It can be internally divided by 2, 3, or 4.
• Pixel clock (PCLK) can be derived from CLKI, AUXCLK, BCLK, or MCLK. It can be internally divided by 2, 3, 4, or 8.

Miscellaneous
• Hardware/Software Color Invert
• Software Power Saving mode
• General Purpose Input / Output pins available
• Single Supply Operation : 3.0V – 3.6V

Package
• 100-pin TQFP package