DESCRIPTION
The SP2525 device is a single +3.0V to +5.5V USB Supervisory Power Control Switch ideal for self-powered and bus-powered Universal Serial Bus (USB) applications. The SP2525 device has low on-resistance (80mΩ typical) and can supply 500mA minimum. The fault currents are limited to 2.0A typical and the flag output pin is available to indicate fault conditions to the USB controller. The 1ms soft start of the SP2525 device will eliminate any momentary voltage drop on the upstream port that may occur when the switch is enabled in bus-powered applications.
■ Compliant to USB Specifications
■ +3.0V to +5.5V Input Voltage Range
■ Open Drain Error Flag Output
■ 2.7V Undervoltage Lockout
■ 500mA Minimum Continuous Load Current
■ 1.25A Short Circuit Current Limit
■ 140mΩ Maximum On-Resistance
■ 80µA On-State Supply Current
■ 1µA Shutdown Current
■ Thermal Shutdown
■ 1ms Soft-Start Power Up
■ Active-High Version: SP2525-1
■ Active-Low Version: SP2525-2