PULSE WIDTH MODULATION AMPLIFIERS

DESCRIPTION
The SA08 is a pulse width modulation amplifier that can supply  9KW  to  the  load.  An  internal  oscillator  requires  no external components. The clock input stage divides the oscillator frequency by two, which provides the switching frequency of 22.5 kHz. The oscillator may also be used to synchronize multiple amplifiers. Current sensing is provided for each half of the bridge giving amplitude and direction data. A shutdown input turns off all four drivers of the H-bridge output. A high side current limit and the programmable low side current limit protect the amplifier from shorts to supply or ground in addition to load shorts. The H-bridge output IGBTs are protected from thermal overloads by directly sensing the temperature of the die. The 12-pin hermetic MO-127 power package occupies only 3 square inches of board space. 

FEATURES
• IGBT OUTPUTS
• WIDE SUPPLY RANGE—16-450V
• 20A TO 100°C CASE
• 3 PROTECTION CIRCUITS
• SYNCHRONIZED OR EXTERNAL OSCILLATOR
• FLEXIBLE FREQUENCY CONTROL

APPLICATIONS
• MOTORS
•  REACTIVE LOADS
• MAGNETIC BEARINGS
• LARGE PIEZO ELEMENTS
• OFF-LINE DRIVERS
• C-D WELD CONTROLLER