INTRODUCTION
The S6B0717 is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 55 common and 100 segment driver circuits. This chip is connected directly to a microprocessor, accepts serial or 8-bit parallel display data and stores in an on-chip display data RAM of 65 x 100 bits. It provides a high-flexible display section due to 1-to-1 correspondence between on-chip display data RAM bits and LCD panel pixels. And it performs display data RAM read/write operation with no external operating clock to minimize power consumption. In addition, because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.

FEATURES
    Driver Output Circuits
        - 55 common outputs / 100 segment outputs
    On-chip Display Data RAM
        - Capacity: 65 x 100 = 6,500 bits
        - Bit data "1": a dot of display is illuminated.
        - Bit data "0": a dot of display is not illuminated.
    Multi-chip Operation (Master, Slave) Available
    Applicable Duty Ratios
    Microprocessor Interface
        - 8-bit parallel bi-directional interface with 6800-series or 8080-series
        - Serial interface (only write operation) available
    On-Chip Low Power Analog Circuit
        - On-chip oscillator circuit
        - Voltage converter (x2, x3, x4, x5)
        - Voltage regulator (temperature coefficient: -0.05%/°C or external input)
        - Voltage follower (LCD bias: 1/5, 1/6 or 1/8)
        - Electronic contrast control function (64 steps)
    Operating Voltage Range
        - Supply voltage (VDD): 2.4 to 3.6 V
        - LCD driving voltage (VLCD = V0 - VSS): 4.0 to 15.0 V
    Wide Operating Temperature Range
        - Ta = -40°C to 85 °C
    Low Power Consumption
        - 100 mA Max. (VDD = 3V, x4 boosting, V0 = 11V, internal power supply ON)
        - 10 mA Max. (during power save [standby] mode)
    Package Type
        - Gold bumped chip or TCP