Current Sensor for AC and DC currents
Put-on sensor with transistor-output
The current sensor S1 records the current in a cable with a hallsensor. At currents of adjustable 5-30 A the transistor-outputs switch and report a current in the monitored cable.
The current sensor can be fixed with a cable fastener (apply to only 1 cable). Thus it can be mounted subsequently without disconnecting the cable. As supply-voltage DC 24 V are required.
The current sensor can be connected to ZIEHL current-relaysfor current detection yes/ no ant to ZIEHL controls for dedusting plants. The connection to a digital input of a PLC also is possible.
For evaluation of measuring data in more than 1 cable, the outputs of several current sensors can be connected in parallel (or-evaluation).
• switching point adjustable 5-30 A
• LED for current flow
• monitoring of AC and DC currents
• mounting without disconnection of cable possible
• 2 transistor-outputs, switching + and -
• direct connection to a PLC possible
• connection to current-relays ZIEHL type STW
• sturdy, sealed execution
• overload capacity: unlimited
• test-voltage 2,5 kV