Renesas MCUs

   54-MHz 32-bit RX MCUs, built-in FPU, 88.56 DMIPS, up to 512-KB flash memory, various communication functions including USB 2.0 full-speed host/function/OTG, CAN, SD host interface, serial sound interface, capacitive touch sensing unit, 12-bit A/D, 12-bit D/A, RTC, Encryption functions

FEATUREs
◾ 32-bit RXv2 CPU core
   • Max. operating frequency: 54 MHz
      Capable of 88.56 DMIPS in operation at 54 MHz
   • Enhanced DSP: 32-bit multiply-accumulate and 16-bit
      multiply-subtract instructions supported
   • Built-in FPU: 32-bit single-precision floating point (compliant to
      IEEE754)
   • Divider (fastest instruction execution takes two CPU clock cycles)
   • Fast interrupt
   • CISC Harvard architecture with 5-stage pipeline
   • Variable-length instructions, ultra-compact code
   • On-chip debugging circuit
   • Memory protection unit (MPU) supported
◾ Low power design and architecture
   • Operation from a single 1.8-V to 5.5-V supply
   • RTC capable of operating on the battery backup power supply
   • Three low power consumption modes
   • Low power timer (LPT) that operates during the software standby state
◾ On-chip flash memory for code
   • 128- to 512-Kbyte capacities
   • On-board or off-board user programming
   • Programmable at 1.8 V
   • For instructions and operands
◾ On-chip data flash memory
   • 8 Kbytes (1,000,000 program/erase cycles (typ.))
   • BGO (Background Operation)
◾ On-chip SRAM, no wait states
   • 32- to 64-Kbyte size capacities
◾ Data transfer functions
   • DMAC: Incorporates four channels
   • DTC: Four transfer modes
◾ ELC
   • Module operation can be initiated by event signals without using
      interrupts.
   • Linked operation between modules is possible while the CPU is sleeping.
◾ Reset and supply management
   • Eight types of reset, including the power-on reset (POR)
   • Low voltage detection (LVD) with voltage settings
◾ Clock functions
   • Main clock oscillator frequency: 1 to 20 MHz
   • External clock input frequency: Up to 20 MHz
   • Sub-clock oscillator frequency: 32.768 kHz
   • PLL circuit input: 4 MHz to 12.5 MHz
   • On-chip low- and high-speed oscillators, dedicated on-chip low-speed
      oscillator for the IWDT
   • USB-dedicated PLL circuit: 4, 6, 8, or 12 MHz
      54 MHz can be set for the system clock and 48 MHz for the USB clock
   • Generation of a dedicated 32.768-kHz clock for the RTC
   • Clock frequency accuracy measurement circuit (CAC)