Номер в каталоге
PI3C3861L
производитель
Pericom Semiconductor
Description
The PI3C3861 is a 10-bit, 2.5volt or 3.3 volt, 2-port bus switch designed with a low On-Resistance (5-ohm) allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BE) input signal. This device is very userful in switching signals that have high bandwidth (>400 MHz).
FEATUREs
• Near-Zero propagation delay
• 5-ohm switches connect inputs to outputs
• High bandwidth (>400 MHz)
• Rail-to-rail 2.5V or 3.3V switching
• 5V I/O Tolerant
• 2.5V Supply Voltage Operation
• Permits Hot-Insertion
• Packaging (Pb-free & Green Available):
– 24-pin 150-mil wide plastic QSOP (Q)
– 24-pin 173-mil wide plastic TSSOP (L)
APPLICATIONs
• High bandwidth data switching
• Hot Docking
Номер в каталоге
Компоненты Описание
PDF
производитель
2.5V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
Pericom Semiconductor Corporation
2.5V/3.3V, High Bandwidth, Hot Insertion, 20-Bit, 2-Port Bus Switch
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 32-Bit, 2-Port, Bus Switch ( Rev : 1999 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 32-Bit, 2-Port, Bus Switch
Pericom Semiconductor Corporation
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch ( Rev : 2010 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch ( Rev : 1999 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch ( Rev : 2011 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch ( Rev : 2010 )
Pericom Semiconductor
2.5V/3.3V, High Bandwidth, Hot Insertion 20-Bit, 2-Port, Bus Switch
Pericom Semiconductor
