The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B product family is not recommended for new designs. The MX29LV160D T/B family is the recommended replacement. Please refer to MX29LV160D T/B datasheet for full specifications and ordering information, or contact your local sales representative for additional support

FEATURES
GENERAL FEATURES
• Byte/Word mode switchable:
   - 524,288 x8 / 262,144 x16 (MX29LV400C)
   - 1,048,576 x8 / 524,288 x16 (MX29LV800C)
   - 2,097,152 x8 / 1,048,576 x16 (MX29LV160C)
• Sector Structure
   - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1 64K-Byte x 7 (MX29LV400C), 64K-Byte x 15 (MX29LV800C), 64K-Byte x 31 (MX29LV160C)
   - Provides sector protect function to prevent program or erase operation in the protected sector
   - Provides chip unprotect function to allow code changing
   - Provides temporary sector unprotect function for code changing in previously protected sector
• Single Power Supply Operation
   - 2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 250mA from -1V to Vcc + 1V
• Low Vcc write inhibit : Vcc ≤ 1.4V
• Compatible with JEDEC standard
   - Pinout and software compatible to single power supply Flash
• Functional compatible with MX29LV400B/MX29LV800B/MX29LV160B device

PERFORMANCE
• High Performance
   - Fast access time: 45R (MX29LV400C and MX29LV800C only), 55R/70/90ns
   - Fast program time: 7us/word typical utilizing accelerate function
   - Fast erase time: 0.7s/sector, 15s/chip (typical, MX29LV160C)
• Low Power Consumption
   - Low active read current: 10mA (typical) at 5MHz
   - Low standby current: 200nA (typical)
• Minimum 100,000 erase/program cycle
• 20 years data retention

SOFTWARE FEATURES
• Erase Suspend/ Erase Resume
   - Suspends sector erase operation to read data from or program data to another sector which is not being erased
• Status Reply
   - Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface (CFI)

HARDWARE FEATURES
• Ready/Busy# (RY/BY#) Output
   - Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input
   - Provides a hardware method to reset the internal state machine to read mode

PACKAGE
• 44-Pin SOP
• 48-Pin TSOP
• 48-Ball TFBGA
• 48-Ball LFBGA
• 48-Ball WFBGA
• 48-Ball XFLGA
• All devices are RoHS Compliant