General Description
The MAX7036 low-cost receiver is designed to receive amplitude-shift-keyed (ASK) and on-off-keyed (OOK) data in the 300MHz to 450MHz frequency range. The receiver has an RF input signal range of -109dBm to 0dBm.
The MAX7036 requires few external components and has a power-down pin to put it in a low-current sleep mode, making it ideal for cost- and power-sensitive applications. The low-noise amplifier (LNA), phase-locked loop (PLL), mixer, IF filter, received-signal-strength indicator (RSSI), and baseband sections are all on-chip. The MAX7036 uses a very-low intermediate frequency (VLIF) architecture. The MAX7036 integrates the IF filter on-chip and, therefore, eliminates an external ceramic filter, reducing the bill-of-materials cost. The device also contains an on-chip automatic gain control (AGC) that reduces the LNA gain by 30dB when the input signal power is large. The MAX7036 operates from either a 5V or a 3.3V power supply and draws 5.5mA (typ) of current.
The MAX7036 is available in a 20-pin thin QFN package with an exposed pad and is specified over the AEC-Q100 Level 2 (-40°C to +105°C) temperature range.

Benefts and Features
● ASK/OOK Modulation
● < 250μs Enable Turn-On Time
● On-Chip PLL, VCO, Mixer, IF, Baseband
● Low IF (200kHz Nominal)
● 5.5mA DC Current
● 1μA Standby Current
● 3.3V/5V Operation
● Small 20-Pin Thin QFN Package with an Exposed Pad
● AEC-Q100 Qualified

APPLICATIONs
● Low-Cost RKE
● Garage Door Openers
● Remote Controls
● Home Automation
● Sensor Networks
● Security Systems