General Description
The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail. They also monitor various circuit parameters and disconnect the load if a fault condition occurs, alerting the host with a logic-level IFAULT output. The MAX5910/MAX5917 operate over a +10V to +65V input voltage range. They are designed to permit hot plugging of an internet appliance such as an IP phone but are not limited to that application.

FEATUREs
♦ Provides Safe Hot Swap for +10V to +65V Power Supplies
♦ IEEE 802.3af Compliant (MAX5917A)
♦ Startup into 500µF Load (MAX5917A)
♦ 280mA Current Limit for MAX5910
♦ 567mA Current Limit for MAX5917A
♦ 420mA Current Limit for MAX5917B
♦ Zero-Current Load Detection
♦ Integrated 2.2Ω Power FET
♦ Status Output Reports Fault Conditions
♦ Internal Switch-Protection Circuitry
♦ Built-In Thermal Shutdown

APPLICATIONs
    IP Phones
    Power-Over-LAN
    Power-Over-MDI
    Remote Power Distribution
    Network Routers
    Network Switches
    Internet Appliances