General Description
The MAX16804 current regulator operates from a 5.5V to 40V input voltage range and delivers 35mA to 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16804 is set by using an external current-sense resistor in series with the LEDs. A dual-mode DIM pin and on-board 200Hz ramp generator allow PWM dimming with an analog or PWM input signal. The analog control signal at dimming input DIM allows for a theater-dimming effect to be implemented. Fast turn-on and turn-off times ensure a wide-range PWM operation, while wave-shaping circuitry minimizes EMI.

FEATUREs
♦ Flexible Dimming Control, Analog or PWM Control Signal for PWM and Theater Dimming
♦ 200Hz On-Board Ramp Generator
♦ Sinks to External PWM Signal (Up to 2kHz)
♦ 5.5V to 40V Operating Range
♦ 35mA to 350mA Adjustable LED Current
♦ 3% LED Current Accuracy
♦ High-Voltage (Up to 40V) DIM Pin
♦ Integrated Pass Element with Low-Dropout Voltage (0.5V typ)
♦ Additional +5V On-Board Regulator with 2mA Capability
♦ Differential LED Current Sense
♦ Low 200mV Current-Sense Reference Reduces Power Losses
♦ Wave-Shaped Edges Minimize EMI During PWM Dimming
♦ Output Short-Circuit and Thermal-Shutdown Protection
♦ Available in Small, Thermally Enhanced, 5mm x 5mm, 20-Pin TQFN Package
♦ -40°C to +125°C Operating Temperature Range

APPLICATIONs
  Automotive Interior: Map, Dome, and Courtesy Lighting
  Automotive Exterior:
     Rear Combination Light (RCL)
     Daytime Running Light (DRL)
     Adaptive Front Light
  Warning Lights for Emergency Vehicles
  Navigation and Marine Indicators
  Signage, Canopies, and Beacons