General description
The ISP1103 is a single-chip generic Universal Serial Bus (USB) transceiver that is fully compliant with the Universal Serial Bus Specification Rev. 1.1. It allows 3.3 V USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) to interface with the physical layer of the Universal Serial Bus. It supports transmitting and receiving serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. It also supports the low-power single-ended input receiver interface in ‘suspend’ mode operation. The ISP1103 operates on a 3.3 V supply voltage.

FEATUREs
■ Complies with Universal Serial Bus Specification Rev. 1.1
■ Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates
■ Slew-rate controlled differential data driver
■ Differential input receiver with wide common-mode range and very high data input sensitivity
■ Stable RCV output during SE0 condition
■ Two single-ended receivers with hysteresis
■ Supports ‘Philips Encoded Data Interface’ and ‘USB-IF Standard Data Interface’
■ Low-power operation in ‘suspend’ mode
■ Operates on a 3.3 V supply voltage
■ Fully backward compatible with PDIUSBP11A
■ Compatible with VHDL ‘Serial Interface Engine’ from USB Implementers Forum
■ Higher than 8 kV ESD protection
■ Full industrial operating temperature range −40 to +85 °C
■ Available in SO14, SSOP14 and TSSOP14 packages.