Overview
The PAN1780 is a Bluetooth 5 Low Energy (LE) module based on the Nordic nRF52840 single chip controller.
FEATUREs
• Surface mount type dimensions: 15.6 mm x 8.7 mm x 2 mm
• Same form factor as PAN1026A and PAN1762 but smaller pitch and more pins
• Nordic nRF52840 featuring ARM® Cortex®-M4F with 64 MHz
• Bluetooth 5 LE including LE 2M and LE Coded PHY
• Embedded 1 MB flash memory and 256 kB internal RAM
• Includes ARM TrustZone® CryptoCell® 310 and supports secure boot including Root of Trust (RoT)
• Up to 48 general purpose I/Os (GPIO), which are shared by up to 4 SPI, 2 I²C, 2 UART, 4 PWM, 8 ADC, 1 NFC-A, 32 kHz IN/OUT, nRESET
• USB 2.0 full-speed device interface
• Built in temperature sensor
Bluetooth
• LE 2 Mbps high speed PHY, LE long range coded PHY
• LE advertising extensions (advertising on 40 channels total)
• Channel selection algorithm #2
• LE secure connections
• Over-the-air update of application software
• Qualified Bluetooth mesh profile stack
Characteristics
• Typical sensitivity: -95 dBm @ 1 Mb/s and -103 dBm @ 125 kb/s
• Typical max. output power: 8 dBm, configurable from -20 dBm in 4 dB steps and -40 dBm in whisper mode
• Typical current consumption: 4.8 mA in Tx (@ 0 dBm) and 4.8 mA in Rx mode
• Typical current consumption: 0.4 µA in System OFF mode, 1.5 µA with RTC wake up
• On-module DC/DC and LDO regulators with automated low current modes
• Voltage range: 1.7 V to 5.5 V
• Temperature range: -40 °C to 85 °C