General Description
The EM78911 is an 8-bit CID (Call Identification) RISC type microprocessor with low power , high speed CMOS technology . Integrated onto a single chip are on_chip watchdog (WDT) , RAM , ROM , programmable real time clock /counter , internal interrupt , power down mode , LCD driver , FSK decoder ,CALL WAITING decoder, DTMF generator and tri-state I/O . The EM78911 provides a single chip solution to design a CID of calling message_display .
FEATURE
CPU
• Operating voltage range : 2.5V〜5.5V
• 16K× 13 on chip ROM
• 2.8K× 8 on chip RAM
• Up to 36 bi-directional tri-state I/O ports
• 8 level stack for subroutine nesting
• 8-bit real time clock/counter (TCC)
• Two sets of 8 bit counters can be interrupt sources
• Selective signal sources and trigger edges , and with overflow interrupt
• Programmable free running on chip watchdog timer
• 99.9% single instruction cycle commands
• Four modes (internal clock 3.579MHz)
1. Sleep mode : CPU and 3.579MHz clock turn off, 32.768KHz clock turn off
2. Idle mode : CPU and 3.579MHz clock turn off, 32.768KHz clock turn on
3. Green mode : 3.579MHz clock turn off, CPU and 32.768KHz clock turn on
4. Normal mode : 3.579MHz clock turn on , CPU and 32.768KHz clock turn on
• Ring on voltage detector and low battery detector
• Input port wake up function
• 9 interrupt source , 4 external , 5 internal
• 100 pin QFP or chip
• Port key scan function
• Clock frequency 32.768KHz
• Eight R-option pins
CID
• Operation Volltage 3.5 〜6V for FSK
• Operation Volltage 2.5 〜6V for DTMF
• Bell 202 , V.23 FSK demodulator
• DTMF generator
• Ring detector on chip
CALL WAITING
• Operation Volltage 3.6 〜5.5V
• Compatible with Bellcore special report SR-TSV-002476
• Call-Waiting (2130Hz plus 2750Hz) Alert Signal Detector
• Good talkdown and talkoff performance
• Sensitivity compensated by adjusting input OP gain
LCD
• LCD operation voltage chosen by software
• Common driver pins : 16
• Segment driver pins : 60
• 1/4 bias
APPLICATION
1. adjunct units
2. answering machines
3. feature phones