General Description
The EL7457C is an ultra-high speed, non-inverting quad CMOS driver. It is capable of running at clock rates up to 40MHz and features 2A peak drive capability and a nominal on-resistance of just 3Ω. The EL7457C is ideal for driving highly capacitive loads, such as storage and vertical clocks in CCD applications. It is also well suited to ATE pin driving, level-shifting and clock-driving applications.
The EL7457C is capable of running from single or dual power supplies while using ground referenced inputs. Each output can be switched to either the high (VH) or low (VL) supply pins, depending on the related input pin. The inputs are compatible with both 3V and 5V CMOS and TTL logic. The output enable (OE) pin can be used to put the outputs into a high-impedance state. This is especially useful in CCD applications, where the driver should be disabled during power
down.

FEATUREs
• Clocking Speeds Up To 40MHz
• 4 Channels
• 12 ns tr/tf at 1000pF Cload
• 1ns Rise and Fall Time Mismatch
• 1.5ns Prop Delay Mismatch
• Low Quiescent Current, <1mA
• Fast Output Enable Function, 12ns
• Wide Output Voltage Range
• 8V >VL >-5V
• -2V • 2A Peak Drive
• 3ΩOn Resistance
• Input Level Shifters
• TTL/CMOS Input Compatible

Applications
• CCD Drivers
• Digital Cameras
• Pin Drivers
• Clock / Line Drivers
• Ultrasound Transducer Drivers
• Ultrasonic and RF Generators
• Level Shifting