SILICON LABEL DESCRIPTION
UniqueWare Add-Only Memories are factory programmed versions of the DS2502 (1024 bit), the DS2505 (16-kbit) and the DS2506 (64k bit) Add-Only Memories, respectively. They differ from the regular devices in their custom ROM family codes (see Ordering Information) and the  UniqueWare Identifier 5E7 in place of the upper 12 bits of the standard serialization field. For technical details on the devices please refer to the DS2502, DS2505 and DS2506 data sheets.

SPECIAL FEATURES
■ 1024 bits, 16 kbits or 64 kbits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground
■ Unique, factory-lasered and tested 64-bit registration number (8-bit family code, 36-bit serialization, 12-bit UniqueWare identifier 5E7H, 8-bit CRC-tester) assures absolute traceability because no two parts are alike.
■ Built-in multidrop controller ensures compatibility with other MicroLAN products
■ EPROM partitioned into 256-bit pages for randomly accessing packetized data records
■ Each memory page can be permanently writeprotected to prevent tampering
■ Device is an “add only” memory where additional data can be programmed into EPROM without disturbing existing data
■ Reduces control, address, data, power and programming signals to a single pin
■ Directly connects to a single port pin of a microprocessor and communicates at up to 16.3k bits per second
■ Presence detector acknowledges when reader first applies voltage
■ Low cost TO-92/PR-35 or 8-pin SOIC and TSOC surface mount packages
■ Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C