Functional Overview
The CYRF69213 is a complete Radio System-on-Chip device, providing a complete RF system solution with a single device and a few discrete components. The CYRF69213 is designed to implement low cost wireless systems operating in the worldwide 2.4 GHz Industrial, Scientific, and Medical (ISM) frequency band (2.400 GHz–2.4835 GHz).

PRoC™ LP Features
■ USB 2.0-USB-IF certified (TID # 40000552)
■ Single Device, Two Functions
   ❐ 8-bit, Flash based USB peripheral MCU function and 2.4 GHz radio transceiver function in a single device
■ Flash Based Microcontroller Function
   ❐ M8C based 8-bit CPU, optimized for Human Interface Devices (HID) applications
   ❐ 256 bytes of SRAM
   ❐ 8 Kbytes of Flash memory with EEPROM emulation
   ❐ In-System reprogrammable through D+/D– pins
   ❐ 16-bit free running timer
   ❐ Low power wake up timer
   ❐ 12-bit Programmable Interval Timer with interrupts
   ❐ Watchdog timer
■ Industry-Leading 2.4 GHz Radio Transceiver Function
   ❐ Operates in the unlicensed worldwide Industrial, Scientific and Medical (ISM) band (2.4 GHz to 2.483 GHz)
   ❐ DSSS data rates of up to 250 Kbps
   ❐ GFSK data rate of 1 Mbps
   ❐ –97 dBm receive sensitivity
   ❐ Programmable output power of up to +4 dBm
   ❐ Auto Transaction Sequencer (ATS)
   ❐ Framing CRC and Auto ACK
   ❐ Received Signal Strength Indication (RSSI)
   ❐ Automatic Gain Control (AGC)
■ Component Reduction
   ❐ Integrated 3.3 V regulator
   ❐ Integrated pull up on D–
   ❐ GPIOs that require no external components
   ❐ Operates off a single crystal
■ Flexible I/O
   ❐ 2 mA source current on all GPIO pins. Configurable 8 mA or 50 mA/pin current sink on designated pins
   ❐ Each GPIO pin supports high impedance inputs, configurable pull up, open-drain output, CMOS/TTL inputs and CMOS output
   ❐ Maskable interrupts on all I/O pins
■ USB Specification Compliance
   ❐ Conforms to USB Specification Version 2.0
   ❐ Conforms to USB HID Specification Version 1.1
   ❐ Supports one Low Speed USB device address
   ❐ Supports one control endpoint and two data end points
   ❐ Integrated USB Transceiver
■ Operating Voltage from 4.0 V to 5.5 V DC
■ Operating Temperature from 0 to 70C
■ Pb-free 40-pin QFN Package
■ Advanced Development Tools Based on Cypress’s PSoC® Tools

APPLICATIONs
The CYRF69213 PRoC LP Low Speed is targeted for the following applications:
■ USB Bridge for Human Interface Devices (HID)
   ❐ Wireless mice
   ❐ Wireless keyboards
   ❐ Remote controls
   ❐ Gaming applications
■ USB Bridge for General Purpose Applications
   ❐ Consumer electronics
   ❐ Industrial applications
   ❐ White goods
   ❐ Home automation
   ❐ Personal health