Functional Overview
The CYRF69213 is a complete Radio System-on-Chip device, providing a complete RF system solution with a single device and a few discrete components. The CYRF69213 is designed to implement low-cost wireless systems operating in the worldwide 2.4-GHz Industrial, Scientific, and Medical (ISM) frequency band (2.400 GHz–2.4835 GHz).

PRoC™ LP Features
• Single Device, Two Functions
   — 8-bit, Flash based USB peripheral MCU function and 2.4 GHz radio transceiver function in a single device
• Flash-based Microcontroller Function
   — M8C based 8-bit CPU, optimized for Human Interface Devices (HID) applications
   — 256 Bytes of SRAM
   — 8 Kbytes of Flash memory with EEPROM emulation
   — In-System reprogrammable through D+/D– pins.
   — 16-bit free running timer
   — Low power wake up timer
   — 12-bit Programmable Interval Timer with interrupts
   — Watchdog timer
• Industry-Leading 2.4 GHz Radio Transceiver Function
   — Operates in the unlicensed worldwide Industrial, Scientific and Medical (ISM) band (2.4 GHz–2.483 GHz)
   — DSSS data rates of up to 250 Kbps
   — GFSK data rate of 1 Mbps
   — –97 dBm receive sensitivity
   — Programmable output power of up to +4 dBm
   — Auto Transaction Sequencer (ATS)
   — Framing CRC and Auto ACK
   — Received Signal Strength Indication (RSSI)
   — Automatic Gain Control (AGC)
• Component Reduction
   — Integrated 3.3V regulator
   — Integrated pull up on D–
   — GPIOs that require no external components
   — Operates off a single crystal
• Flexible I/O
   — High current drive on GPIO pins. Configurable 8-mA or 50-mA/pin current sink on designated pins
   — Each GPIO pin supports high-impedance inputs, configurable pull up, open-drain output, CMOS/TTL inputs and CMOS output
   — Maskable intrrupts on all I/O pins
• USB Specification Compliance
   — Conforms to USB Specification Version 2.0
   — Conforms to USB HID Specification Version 1.1
   — Supports one Low Speed USB device address
   — Supports one control endpoint and two data end points
   — Integrated USB Transceiver
• Operating voltage from 4.0V to 5.5V DC
• Operating temperature from 0 to 70°C
• Lead-free 40-lead QFN package
• Advanced development tools based on Cypress’s PSoC® Tools

APPLICATIONs
The CYRF69213 PRoC LP Low Speed is targeted for the following applications:
• USB Bridge for Human Interface Devices (HID)
   — Wireless mice
   — Wireless keyboards
   — Remote controls
   — Gaming applications
• USB Bridge for General Purpose Applications
   — Consumer electronics
   — Industrial applications
   — White goods
   — Home automation
   — Personal health