This ASIC provides up to 350 mA of drive current for powering bulbs. The typical application for this part is for use in airbag systems using a type 194 bulb. On–chip diagnostics provide open circuit and short circuit detection in the output on mode. In addition, the output driver will turn on (sink current) when VCC is low. Fault is an active–low output which reports in the output–on mode. Internal pull–up circuitry is provided to ensure the output pin turns on when the Control pin is floating.

FEATUREs
• Fault Detection
   – Open Circuit
   – Short Circuit
   – Overtemperature
• VCC Sense: Output Turns On with Loss of VCC
• Low Standby Current
• Internally Fused Leads in SO–8 Package