Description
The Atmel SAMA5D3 series is a high-performance, power-efficient embedded MPU based on the ARM® Cortex™-A5 processor, achieving 536 MHz with power consumption levels below 0.5 mW in low-power mode. The device features a floating point unit for high-precision computing and accelerated data processing, and a high data bandwidth architecture. It integrates advanced user interface and connectivity peripherals and security features.
The SAMA5D3 series features an internal multi-layer bus architecture associated with 39 DMA channels to sustain the high bandwidth required by the processor and the high-speed peripherals. The device offers support for DDR2/LPDDR/LPDDR2 and MLC NAND Flash memory with 24-bit ECC.

Features
● Core
   ● ARM® Cortex™-A5 Processor with ARM v7-A Thumb2® Instruction Set
      ● CPU Frequency up to 536 MHz
   ● 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System
      Architecture (VMSA)
   ● Fully Integrated MMU and Floating Point Unit (VFPv4)
● Memories
   ● One 160 Kbyte Internal ROM Single-cycle Access at System Speed,
      Embedded Boot Loader: Boot on
      NAND Flash, SDCard, eMMC, serial DataFlash®, selectable Order
   ● One 128 Kbyte Internal SRAM, Single-cycle Access at System Speed
   ● High Bandwidth 32-bit Multi-port Dynamic Ram Controller supporting 512 Mbyte 8 bank
      DDR2/LPDDR/LPDDR2
   ● Independent Static Memory Controller with SLC/MLC NAND Support with up to
      24-bit Error Correcting Code  (PMECC)
● System running up to 166 MHz
   ● Power-on Reset Cells, Reset Controller, Shut Down Controller, Periodic Interval Timer,
      Watchdog Timer and  Real Time Clock
   ● Boot Mode Select Option, Remap Command
   ● Internal Low-power 32 kHz RC Oscillator and Fast 12 MHz RC Oscillators
   ● Selectable 32768 Hz Low-power Oscillator and 12 MHz Oscillator
   ● One 400 to 1000 MHz PLL for the System and one PLL at 480 MHz optimized for USB High
      Speed
   ● 39 DMA Channels including two 8-channel 64-bit Central DMA Controllers
   ● 64-bit Advanced Interrupt Controller
   ● Three Programmable External Clock Signals
   ● Programmable Fuse Box with 256 fuse bits, 192 of them available for Customer
● Low Power Management
   ● Shut Down Controller
   ● Battery Backup Registers
   ● Clock Generator and Power Management Controller
   ● Very Slow Clock Operating Mode, Software Programmable Power Optimization Capabilities
● Peripherals
   ● LCD TFT Controller with Overlay, Alpha-blending, Rotation, Scaling and Color Space
      Conversion
   ● ITU-R BT. 601/656 Image Sensor Interface
   ● Three HS/FS/LS USB Ports with On-Chip Transceivers
      ● One Device Controller
      ● One Host Controller with Integrated Root Hub (3 Downstream Ports)
   ● One 10/100/1000 Mbps Gigabit Ethernet Mac Controller (GMAC) with IEEE1588 support
   ● One 10/100 Mbps Ethernet Mac Controller (EMAC)
   ● Two CAN Controllers with 8 Mailboxes, fully Compliant with CAN 2.0 Part A and 2.0 Part B
   ● Softmodem Interface
   ● Three High Speed Memory Card Hosts (eMMC 4.3 and SD 2.0)
   ● Two Master/Slave Serial Peripheral Interface
   ● Two Synchronous Serial Controllers
   ● Three Two-wire Interface up to 400 Kbits supporting I2C Protocol and SMBUS
   ● Four USARTs, two UARTs, one DBGU
   ● Two Three-channel 32-bit Timer/Counters
   ● One Four-channel 16-bit PWM Controller
   ● One 12-channel 12-bit Analog-to-Digital Converter with Resistive Touch-Screen function
   ● Write Protected Registers (Continue ...)