Description
The Atmel® AT30TS00 combines a temperature sensor, programmable overtemperature alarms, and a 2-wire I2C/SMBus compatible serial interface into single compact packages specifically designed for DRAM memory module applications. However, the AT30TS00 is ideal for many other applications. The AT30TS00 converts its die temperature into digital values using internal analog-to-digital converters (ADCs). The result of the conversion is held in a temperature register and is readable at any time through the serial interface. The temperature sensor converts temperatures from -20°C to +125°C to a digital word and provides an accuracy of ±1°C (max.) in the temperature range +75°C to +95°C. The temperature sensor continuously monitors temperature and updates data in the temperature register at least 8 times per second.

FEATUREs
• 11-bit ADC Temp-to-Digital Converter with 0.125°C Resolution
• Temperature Sensor Compliant with Jedec JC42.4
• Two-wire Serial Interface: I2C/SMBus compatible
   ― SMBus Timeout supported
• B-grade Accuracy
   ― ±1°C (max) for +75°C to +95°C
   ― ±2°C (max) for +40°C to +125°C
   ― ±3°C (max) for -20°C to +125°C
• Optimized for voltage range: 2.7V to 3.6V
• 100khz and 400khz Compatibility
• Up to Eight Devices on a Single Bus
• Versatile Alarm Output with Programmable Trip Temperatures
• Programmable hysteresis threshold: off, 0°C, 1.5°C, 3°C, 6 °C
• Schmitt Trigger, filtered inputs for Noise Suppression
• Low Operating current
   ― Temperature Sensor Active ~ 0.2mA (typ.)
• Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
   ― 8-pad Very Very Thin DFN (2 x 3 x 0.8mm)