General Description
The Am29LV160M is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes or 1,048,576 words. The device is offered in a 48-ball Fine-pitch BGA, 64-ball Fortified BGA, and 48-pin TSOP packages. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. The device requires only a single 3.0 volt power supply for both read and write functions, designed to be programmed in-system with the standard system 3.0 volt VCC supply. The device can also be programmed in standard EPROM programmers.

Distinctive Characteristics
Architectural Advantages
■ Single power supply operation
   — 3 V for read, erase, and program operations
■ Manufactured on 0.23 µm MirrorBitTM process technology
   — Fully compatible with Am29LV160D device
■ Secured Silicon Sector region
   — 128-word/256-byte sector for permanent, secure identification through an 8-word/16-byte random Electronic Serial Number, accessible through a command sequence
   — May be programmed and locked at the factory or by the customer
■ Flexible sector architecture
   — One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty one 64 Kbyte sectors (byte mode)
   — One 8 Kword, two 4 Kword, one 16 Kword, and thirty one 32 Kword sectors (word mode)
■ Compatibility with JEDEC standards
   — Provides pinout and software compatibility for single power supply flash, and superior inadvertent write protection
■ Top or bottom boot block configurations available
■ Minimum 100,000 erase cycle guarantee per sector
■ 20-year data retention at 125°C Performance Characteristics
■ High performance
   — Access times as fast as 70 ns
   — 0.7 s typical sector erase time
■ Low power consumption (typical values at 5 MHz)
   — 400 nA standby mode current
   — 15 mA read current
   — 40 mA program/erase current
   — 400 nA Automatic Sleep mode current
■ Package options
   — 48-ball Fine-pitch BGA
   — 64-ball Fortified BGA
   — 48-pin TSOP
 
Software Features
   — Program Suspend & Resume: read other sectors before programming operation is completed
   — Erase Suspend & Resume: read/program other sectors before an erase operation is completed
   — Data# polling & toggle bits provide status
   — Unlock Bypass Program command reduces overall multiple-word programming time
   — CFI (Common Flash Interface) compliant: allows host system to identify and accommodate multiple flash devices

Hardware Features
   — Sector Protection: hardware-level method of preventing write operations within a sector
   — Temporary Sector Unprotect: VID-level method of changing code in locked sectors
   — Hardware reset input (RESET#) resets device
   — Ready/Busy# output (RY/BY#) indicates program or erase cycle completion