GENERAL DESCRIPTION
The Am29LV010B is a 1 Mbit, 3.0 Volt-only Flash memory device organized as 131,072 bytes. The Am29LV010B has a uniform sector architecture.
The device is offered in 32-pin PLCC and 32-pin TSOP packages. The byte-wide (x8) data appears on DQ7–DQ0. All read, erase, and program operations are accomplished using only a single power supply. The device can also be programmed in standard EPROM programmers.

DISTINCTIVE CHARACTERISTICS
■ Single power supply operation
   — Full voltage range: 2.7 to 3.6 volt read and write
      operations for battery-powered applications
   — Regulated voltage range: 3.0 to 3.6 volt read and
      write operations and for compatibility with high
      performance 3.3 volt microprocessors
■ Manufactured on 0.35 µm process technology
■ High performance
   — Full voltage range: access times as fast as 55 ns
   — Regulated voltage range: access times as fast as 45 ns
■ Ultra low power consumption (typical values at 5 MHz)
   — 200 nA Automatic Sleep mode current
   — 200 nA standby mode current
   — 7 mA read current
   — 15 mA program/erase current
■ Flexible sector architecture
   — Eight 16 Kbyte
   — Supports full chip erase
   — Sector Protection features:
      Hardware method of locking a sector to prevent
      any program or erase operations within that
      sector
      Sectors can be locked in-system or via
      programming equipment
      Temporary Sector Unprotect feature allows code
      changes in previously locked sectors
■ Unlock Bypass Mode Program Command
   — Reduces overall programming time when
      issuing multiple program command sequences
■ Embedded Algorithms
   — Embedded Erase algorithm automatically
      preprograms and erases the entire chip or any
      combination of designated sectors
   — Embedded Program algorithm automatically
      writes and verifies data at specified addresses
■ Minimum 1,000,000 write cycle guarantee per sector
■ Package option
   — 32-pin TSOP
   — 32-pin PLCC
■ Compatibility with JEDEC standards
   — Pinout and software compatible with single power supply Flash
   — Superior inadvertent write protection
■ Data# Polling and toggle bits
   — Provides a software method of detecting program or erase operation completion
■ Erase Suspend/Erase Resume
   — Supports reading data from or programming data to a sector that is not being erased