PRODUCT FAMILY OVERVIEW
This datasheet contains the specifications for the automotive version of the 28F200BR family of boot block flash memory devices.
This device continues to offer the same functionality as earlier “BX” devices but adds the capability of performing program and erase operations with a 5V or 12V VPP. The A28F200BR automatically senses which voltage is applied to the VPP pin and adjusts its operation accordingly.

■ Intel SmartVoltage Technology
    - 5V or 12V Program/Erase
    - 5V Read Operation
■ Very High Performance Read
    - 80 ns Max. Access Time,
    - 40 ns Max. Output Enable Time
■ Low Power Consumption
    - Maximum 65 mA Read Current at 5V
■ x8/x16-Selectable Input/Output Bus
    - High Performance 16- or 32-bit CPUs
■ Optimized Array Blocking Architecture
    - One 16-KB Protected Boot Block
    - Two 8-KB Parameter Blocks
    - One 96-KB Main Block
    - One 128-KB Main Block
    - Top or Bottom Boot Locations
■ Hardware-Protection for Boot Block
■ Software EEPROM Emulation with Parameter Blocks
■ Automotive Temperature Operation
    - -40°C to +125°C
■ Extended Cycling Capability
    - 30,000 Block Erase Cycles for Parameter Blocks
    - 1,000 Block Erase Cycles for Main Blocks
■ Automated Word/Byte Program and Block Erase
    - Industry-Standard Command User Interface
    - Status Registers
    - Erase Suspend Capability
■ SRAM-Compatible Write Interface
■ Automatic Power Savings Feature
    - 1 mA Typical ICC Active Current in Static Operation
■ Reset/Deep Power-Down Input
    - 0.2 µA ICCTypical
    - Provides Reset for Boot Operations
■ Hardware Data Protection Feature
    - Program/Erase Lockout during Power Transitions
■ Industry-Standard Surface Mount Packaging
    - 44-Lead PSOP: JEDEC ROM Compatible
■ ETOX™ IV Flash Technology