74ALVCH16952
16-bit registered transceiver; 3-state
Rev. 3 — 9 January 2018
Product data sheet
1 General description
The 74ALVCH16952 consists of two sections, each containing a dual octal non-inverting
registered transceiver. Two 8-bit back to back registers store data flowing in both
directions between two bidirectional buses. Data applied to the inputs is entered and
stored on the rising edge of the clock (nCPAB and nCPBA) provided that the clock
enable (nCEAB and nCEBA) is LOW. The data is then present at the output buffers, but
is only accessible when the output enable input (nOEAB and nOEBA) is LOW. Data flow
from A inputs to B outputs is the same as for B inputs to A outputs.
2 Features and benefits
• CMOS low-power consumption
• Multibyte flow-through pinout architecture
• Low inductance, multiple center power and ground pins for minimum noise and ground
bounce
• Direct interface with TTL levels
• Output drive capability 50 Ω transmission lines at 85 °C
• Complies with JEDEC standard JESD8-B
3 Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
74ALVCH16952DGG -40 °C to +85 °C
Name
TSSOP56
Description
plastic thin shrink small outline package;
56 leads; body width 6.1 mm
Version
SOT364-1