AFBR-5803Z Просмотр технического описания (PDF) - Broadcom Corporation

Номер в каталоге

Компоненты Описание

Список матч

AFBR-5803Z

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low-Cost 1 × 9 Package Style

Broadcom Corporation 

AFBR-5803Z/5803TZ/5803AZ/5803ATZ

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in

Low-Cost 1 × 9 Package Style

Data Sheet

Description

The AFBR-5800Z family of transceivers from Broadcom®

provide the system designer with products to implement a

range of Fast Ethernet, FDDI, and Asynchronous Transfer Mode

(ATM) designs at the 100 Mb/s-125 MBd rate.

The transceivers are all supplied in the industry standard 1 × 9

SIP package style with either a duplex SC or a duplex ST*1

connector interface.

FDDI PMD, ATM and Fast Ethernet 2-km

Backbone Links

The AFBR-5803Z/5803TZ are 1300-nm products with optical

performance compliant with the FDDI PMD standard. The FDDI

PMD standard is ISO/IEC 9314-3: 1990 and ANSI X3.166 – 1990.

These transceivers for 2-km multimode fiber backbones are

supplied in the small 1 × 9 duplex SC or ST package style.

The AFBR-5803Z/5803TZ is useful for both ATM 100 Mb/s

interfaces and Fast Ethernet 100BASE-FX interfaces. The ATM

Forum User-Network Interface (UNI) Standard, Version 3.0,

defines the Physical Layer for 100-Mb/s Multimode Fiber

Interface for ATM in Section 2.3 to be the FDDI PMD Standard.

Likewise, the Fast Ethernet Alliance defines the Physical Layer

for 100BASE-FX for Fast Ethernet to be the FDDI PMD Standard.

ATM applications for physical layers other than 100-Mb/s

Multimode Fiber Interface are supported by Broadcom.

Products are available for both the single mode and the

multi-mode fiber SONET OC-3c (STS-3c) ATM interfaces and the

155 Mb/s-194 MBd multi-mode fiber ATM interface as specified

in the ATM Forum UNI.

Contact your Broadcom sales representative for information on

these alternative Fast Ethernet, FDDI, and ATM products.

Features

 Full compatibility with the optical performance

requirements of the FDDI PMD standard

 Full compatibility with the FDDI LCF-PMD standard

 Full compatibility with the optical performance

requirements of the ATM 100-Mb/s physical layer

 Full compatibility with the optical performance

requirements of 100BASE-FX version of IEEE802.3u

 Multisourced 1 × 9 package style with choice of duplex SC

or duplex ST1 receptacle

 Wave solder and aqueous wash process compatible

 Single +3.3V or +5V power supply

 RoHS compliance

Applications

 Multimode fiber backbone links

 Multimode fiber wiring closet to desktop links

 Very low cost multimode fiber links from wiring closet to

desktop

 Multimode fiber media converters

1. ST is a registered trademark of AT&T Lightguide Cable

Connectors

Broadcom

-1-

Share Link: