AFBR-5803Z Просмотр технического описания (PDF) - Broadcom Corporation

Номер в каталоге

Компоненты Описание

Список матч

AFBR-5803Z

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low-Cost 1 × 9 Package Style

Broadcom Corporation 

AFBR-5803Z/5803TZ/5803AZ/5803ATZ

Data Sheet

i. Signal detect output shall be deasserted within 350 μs after a step decrease in the Input Optical Power from a level that is the lower of; –31 dBm or PD + 4 dB

(PD is the power level at which signal detect was deasserted), to a power level of –45 dBm or less. This step decrease will have occurred in less than 8 ns. The

receiver output will have a BER of 10–2 or better for a period of 12 μs or until signal detect is deasserted. The input data stream is the Quiet Line State. Also,

signal detect will be deasserted within a maximum of 350 μs after the BER of the receiver output degrades above 10–2 for an input optical data stream that

decays with a negative ramp function instead of a step function. See Figure 15 for more information.

Ordering Information

The AFBR-5803Z/5803TZ/5803AZ/5803ATZ 1300 nm products are available for production orders through the Broadcom

Component Field Sales Offices and Authorized Distributors world wide.

Temperature ranges:

0°C to +70°C

–10°C TO +85°C

AFBR-5803Z/5803TZ

AFBR-5803AZ/5803ATZ

NOTE

 The “T” in the product numbers indicates a transceiver with a duplex ST connector receptacle.

 Product numbers without a “T” indicate transceivers with a duplex SC connector receptacle.

Broadcom

- 18 -

Share Link: