RX20D44 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

Список матч

RX20D44

Hand Tools Extraction Tool Size 20

Unspecified 

UT0W

Wiring instructions

Stripping instruction

This operation should be carried out with

great care. Use stripping pliers which are

designed for use with the size of wire

being stripped.

In order to maintain the connector’s sealing

level and cable retention, the wires should

have the external shealth dimensions

conform to table.

Recommended conductor loading:

- 50% with Max diameter wires

- 50% with min diameter wires

-100% with medium size wires.

Crimping instruction machined

contacts

Insert the wire into the crimp barrel and

ensure that it has penetrated correctly by

checking that it may be seen through the

inspection hole in the barrel.

The pliers must be used on the jaws side.

Place the correct locator for the contact

size in the crimp tool. Completely open the

tool.

Place the contact and wire in the tool. Fully

close the tool, allowing it to reopen on its

town. Visually check that the wire is visible

through the inspection hole.

Crimping instruction stamped

and formed contacts

Completely open the tool.

Fully insert the contact into the locator

appropriate gauge. The contact crimping

lugs should be directed upwards according

to the hereunder drawing.

Put the stripped wire in the crimping part

until it comes in contact with the stopper

plate. Make sure that no strands stick out

of the stripping part.

Fully close the tool, allowing it to reopen on

its own.

Visually check that the overall aspect of the

crimping.

Stamped & Formed

AWG 16 Ø 1.6 mm

AWG 20 Ø 1 mm

Machined

AWG 16 Ø 1.6 mm

AWG 20 Ø 1 mm

9

Share Link: