RX20D44 Просмотр технического описания (PDF) - Unspecified
Номер в каталоге
Компоненты Описание
Список матч
RX20D44 Datasheet PDF : 11 Pages
| |||
Crimp and extraction tooling
UT0W
Crimp tooling for machined
contacts
Weight : 300 gr
Length : 170 mm
Crimp tooling for stamped and
formed contacts
Weight : 400 gr
Length : 230 mm
Weight : 400 gr
Length : 205 mm
MH860
A light weight crimp tool qualified to MIL-C-22520 that gives an 8
impression crimp with a precision cycle-controlled ratcheting
mechanism. It features an 8 step crimp-depth selector.
The tool can be provided with different locators heads to crimp
different contact types (to be ordered separately).
Locator ref.: MH86301
Y16SCM3
A light weight crimp tool with fixed 3-groove die set for AWG26 to
20 for: size 20 loose piece formed contacts.
Ratchet controlled to guarantee a complete crimp cycle. Each crimp
tool is supplied with a locator to guarantee a perfect crimp indent
positioning.
Y14MTV
A light weight crimp tool with fixed 3-groove die set for AWG26 to 14
for: Size 20 loose piece formed contacts.
Ratchet controlled to guarantee a complete crimp cycle.
RX20D44
A spring loaded extraction tool. This tool ensures that the contact
locking louvres are fully retracted before any pressure is applied to
extract a contact. It is especially suitable for applications where the
integrity of the assemblies are of the utmost importance.
How to extract a contact out of its cavity?
Slide the extraction tip over contact from mating side till the locking
spring from the contact is depressed.
Push on handle to push out the contact with the spring loaded inner
plunger.
RTM205
This tool is especially designed to ease insertion UT0W contacts
crimped on very flexible or small wire sizes. Simply position the
insertion tool so that the tip of the tool bears against the back of the
wire barrel, retaining the wire with thumb in the groove of the tool.
Push the contact slowly into the connector until it snaps into
position.
7
Share Link: 