MPVZ5050 Просмотр технического описания (PDF) - Freescale Semiconductor

Номер в каталоге

Компоненты Описание

Список матч

MPVZ5050

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated

Freescale Semiconductor 

Operating Characteristics

Pressure

Table 1. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2. Decoupling circuit shown in

Figure 4 required to meet electrical specifications.)

Characteristic

Symbol Min

Typ

Max

Unit

Pressure Range(1)

POP

0

—

50

kPa

Supply Voltage(2)

VS

4.75

5.0

5.25

Vdc

Supply Current

Io

—

7.0

10

mAdc

Minimum Pressure Offset(3)

@ VS = 5.0 Volts

(0 to 85°C)

Voff

0.088

0.2

0.313

Vdc

Full Scale Output(4)

@ VS = 5.0 Volts

(0 to 85°C)

VFSO

4.587

4.7

4.813

Vdc

Full Scale Span(5)

@ VS = 5.0 Volts

Accuracy(6)

(0 to 85°C)

(0 to 85°C)

VFSS

—

—

—

4.5

—

Vdc

—

±2.5

%VFSS

Sensitivity

V/P

—

90

—

mV/kPa

Response Time(7)

tR

—

1.0

—

ms

Output Source Current at Full Scale Output

Io+

—

0.1

—

mAdc

Warm-Up Time(8)

—

—

20

—

ms

Offset Stability(9)

—

—

± 0.5

—

%VFSS

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

2.Device is ratiometric within this specified excitation range.

3.Offset (Voff) is defined as the output voltage at the minimum rated pressure.

4.Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.

5.Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

6.Accuracy (error budget) consists of the following:

Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.

Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and

from the minimum or maximum operating temperature points, with zero differential pressure applied.

Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or

maximum rated pressure at 25°C.

TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C.

TcOffset: Output deviation with minimum pressure applied, over the temperature range of 0° to 85°C, relative to 25°C.

Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS at 25°C.

7.Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a

specified step change in pressure.

8.Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.

9.Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

Sensors

Freescale Semiconductor

MPX5050

3

Share Link: