AD7928BRU-REEL7 Просмотр технического описания (PDF) - Analog Devices
Номер в каталоге
Компоненты Описание
Список матч
AD7928BRU-REEL7 Datasheet PDF : 24 Pages
| |||
AD7908/AD7918/AD7928
ABSOLUTE MAXIMUM RATINGS1
(TA = 25°C, unless otherwise noted.)
AVDD to AGND . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
VDRIVE to AGND . . . . . . . . . . . . . . . . –0.3 V to AVDD + 0.3 V
Analog Input Voltage to AGND . . . . –0.3 V to AVDD + 0.3 V
Digital Input Voltage to AGND . . . . . . . . . . . . –0.3 V to +7 V
Digital Output Voltage to AGND . . . –0.3 V to AVDD + 0.3 V
REFIN to AGND . . . . . . . . . . . . . . . . –0.3 V to AVDD + 0.3 V
Input Current to Any Pin Except Supplies2 . . . . . . . . ±10 mA
Operating Temperature Range
Commercial (B Version) . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . –65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
TSSOP Package, Power Dissipation . . . . . . . . . . . . . 450 mW
qJA Thermal Impedance . . . . . . . . . . . . . 143°C/W (TSSOP)
qJC Thermal Impedance . . . . . . . . . . . . . . 45°C/W (TSSOP)
Lead Temperature, Soldering
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . . 215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 kV
NOTES
1 Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2 Transient currents of up to 100 mA will not cause SCR latch-up.
ORDERING GUIDE
Model
Temperature
Range
Linearity
Error (LSB)1
Package
Option
Package
Description
AD7908BRU
AD7908BRU-REEL
AD7908BRU-REEL7
AD7918BRU
AD7918BRU-REEL
AD7918BRU-REEL7
AD7928BRU
AD7928BRU-REEL
AD7928BRU-REEL7
EVAL-AD79x8CB2
EVAL-CONTROL BRD3
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Ϯ0.2
Ϯ0.2
Ϯ0.2
Ϯ0.5
Ϯ0.5
Ϯ0.5
Ϯ1
Ϯ1
Ϯ1
RU-20
RU-20
RU-20
RU-20
RU-20
RU-20
RU-20
RU-20
RU-20
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
Evaluation Board
Controller Board
NOTES
1Linearity error here refers to integral linearity error.
2This can be used as a standalone evaluation board or in conjunction with the Evaluation Controller Board for evaluation/demonstration purposes.
The board comes with one chip of each the AD7908, AD7918, and AD7928.
3This board is a complete unit allowing a PC to control and communicate with all Analog Devices evaluation boards ending in the CB designators.
To order a complete evaluation kit, order the particular ADC evaluation board, e.g., EVAL-AD79x8CB, the EVAL-CONTROL BRD2, and a
12 V ac transformer. See relevant Evaluation Board Technical Note for more information.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD7908/AD7918/AD7928 feature proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions
are recommended to avoid performance degradation or loss of functionality.
REV. A
–9–
Share Link: 