CS48DV2B(2008) Просмотр технического описания (PDF) - Cirrus Logic

Номер в каталоге

Компоненты Описание

Список матч

CS48DV2B
(Rev.:2008)

32-bit Audio DSP for Dedicated Dolby Volume and Audistry by Dolby

Cirrus Logic 

CS48DV2B Data Sheet

32-bit Audio DSP for Dedicated Dolby Volume and Audistry by Dolby

3. Code Overlays

The suite of software available for the CS48DV2B DSP consists of an operating system (OS) and a

library of overlays. The overlays have been divided into three main groups called Matrix-processors,

Virtualizer-processors, and Post-processors. All software components are defined below:

1. OS/Kernel - Encompasses all non-audio processing tasks, including loading data from external

memory, processing host messages, calling audio-processing subroutines, error concealment,

etc.

2. Matrix-processor- Any Module that performs a matrix decode on PCM data to produce more

output channels than input channels (2Ön channels). Examples are Dolby® ProLogic® IIx and

DTS Neo:6™. Generally speaking, these modules increase the number of valid channels in the

audio I/O buffer.

T 3. Virtualizer-processor - Any module that encodes PCM data into fewer output channels than

F input channels (nÖ2 channels) with the effect of providing “phantom” speakers to represent the

physical audio channels that were eliminated. Examples are Dolby Headphone® and Dolby®

A Virtual Speaker®. Generally speaking, these modules reduce the number of valid channels in the

audio I/O buffer.

R 4. Post-processors - Any module that processes audio I/O buffer PCM data in-place after the

D matrix- or virtualizer-processors. Examples are the Dolby Volume and Audistry by Dolby

firmware, bass management, audio manager, tone control, EQ, delay, and customer-specific

effects

L I The bulk of each overlay is stored in ROM within the CS48DV2B, but a small image is required to

configure the overlays and boot the DSP. This small image can either be stored in an external serial

IA H FLASH/EEPROM, or downloaded via a host controller through the SPI™/I2C® serial port.

The overlay structure reduces the time required to reconfigure the DSP when a processing change is

T P requested. Each overlay can be reloaded independently without disturbing the other overlays. For

N L example, when a new matrix-processor is selected, the OS, virtualizer-, and post-processors do not

need to be reloaded — only the new matrix-processor. This fact is also true for the other overlays.

E E Table 2 lists the firmware available based on device selection. Please refer to AN298, CS485xx

Firmware User’s Manual for the latest listing of application codes and Cirrus Framework™ modules

CONFID D available.

6

Copyright 2008 Cirrus Logic

DS875F1

CONFIDENTIAL

Share Link: