MAX328 Просмотр технического описания (PDF) - Maxim Integrated
Номер в каталоге
Компоненты Описание
Список матч
MAX328 Datasheet PDF : 10 Pages
| |||
Ultra-Low Leakage Monolithic CMOS
Analog Multiplexers
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ ........................................................................................+44V
GND .....................................................................................+25V
Digital Inputs (Note 1), VS, VD ............................-2V to (V+ + 2V)
Current (Any Terminal, Except S or D)................................30mA
Continuous Current, S or D
(pulsed at 1ms, 10% duty cycle max)..............................40mA
Operating Temperature Range
MAX328/329 C _ _................................................0°C to +70°C
MAX328/329 E _ _ .............................................-40°C to +85°C
MAX328/329 M _ _ ..........................................-55°C to +125°C
Power Dissipation (Package) (Note 1)
CERDIP (derate 10mW/°C above +70°C) .....................800mW
PDIP (derate 10.5mW/°C above +70°C) ....................842.1mW
Wide SO (derate 14.3mW/°C above +70°C) ............1142.9mW
TQFN (derate 33.3mW/°C above +70°C) .................2666.7mw
Storage Temperature.........................................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow)
Lead(Pb)-free packages (PDIP, TQFN, Wide SO) ........+260°C
Packages containing lead(Pb) (CERDIP, PDIP, Wide SO)..+240°C
Packages containing lead(Pb) (TQFN) .........................+260°C
Note 1: All leads soldered or welded to PC board.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = 15V, V- = -15V, VGND = 0V, TA = +25°C, unless otherwise noted.) (Note 2)
PARAMETER
SWITCH
Analog Signal Range
Drain-Source
On-Resistance
SYMBOL
CONDITIONS
MAX328M
MAX329M
MIN TYP MAX
VANALOG
RDS(ON)
VD = 10V,
IS = 100µA
VD = -10V,
IS = 100µA
-15
+15
Seq. each
switch on,
VAL = 0.8V,
VAH = 2.4V
1.5 2.5
1.0 2.5
Greatest Change in
RDS(ON) =
Drain-Source On-
Resistance Between
RDS(ON)
RDS(ON) Max - RDS(ON) Min
(
)
2
Channels
RDS(ON) Ave
Source Off-Leakage
Current (Note 3)
Drain Off-
Leakage
Current
(Note 3)
MAX328
MAX329
Drain On-
Leakage
Current
(Note 3)
MAX328
MAX329
IS(OFF)
ID(OFF)
ID(ON)
VS = 10V, VD = -10V
VS = -10V, VD = 10V
VD = 10V, VS = -10V
VD = -10V, VS = 10V
VD = 10V, VS = -10V
VD = -10V, VS = 10V
VS (all) = VD = 10V
VS (all) = VD = -10V
VS (all) = VD = 10V
VS (all) = VD = -10V
VEN = 0V
VEN = 0V
Seq. each
switch on,
VAL = 0.8V,
VAH = 2.4V
0.1 ±10
0.3 ±10
0.3 ±10
1.0 ±10
0.3 ±10
0.5 ±10
3.0 ±10
2.0 ±10
1.5 ±10
1.0 ±10
MAX328C/E
MAX329C/E
MIN TYP MAX
UNITS
-15
+15 V
1.5 3.5
k
1.0 3.5
2
%
0.1 ±10
pA
0.3 ±10
0.3 ±10
1.0 ±10
pA
0.3 ±10
0.5 ±10
3.0 ±10
2.0 ±10
pA
1.5 ±10
1.0 ±10
2 _______________________________________________________________________________________
Share Link: 