DESCRIPTION
The 74AVC16835A is a 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).
This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live Insertion).
A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient. See the graphs on page 8 for typical curves.

FEATURES
● Wide supply voltage range of 1.2 V to 3.6 V
● Complies with JEDEC standard no. 8-1A/5/7
● CMOS low power consumption
● Input/output tolerant up to 3.6 V
● DCO (Dynamic Controlled Output) circuit dynamically changes
   output impedance, resulting in noise reduction without speed
   degradation
● Low inductance multiple VCC and GND pins for minimum noise
   and ground bounce
● Power off disables 74AVC16835A outputs, permitting Live
   Insertion
● Integrated input diodes to minimize input overshoot and
   undershoot
● Full PC133 solution provided when used with PCK2509S or
   PCK2510S and CBT16292