DESCRIPTION
The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required and are also available in various military equivalent screening levels by adding a prefix identifier as also described in the Features section. They may be operated at high maximum dc currents with adequate heat sinking with their comparatively low thermal resistance design. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

FEATURES
• JEDEC registered 1N5333 to 1N5388B
• Zener voltage available 3.3V to 200V
• Standard voltage tolerances are plus/minus 5%
   with B suffix and 10 % with A suffix identification
• Tight tolerances available in plus or minus 2% or
   1% with C or D suffix respectively
• Options for screening in accordance with 
   MIL-PRF-19500 for JAN, JANTX, JANTXV, and
   JANS are available by adding MQ, MX, MV, or
   MSP prefixes respectively to part numbers.
• Surface mount equivalents available as
   SMBJ5333 to SMBJ5388B, or SMBG5333B to
   SMBG5388B

APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current and
   temperature range
• Wide selection from 3.3 to 200 V
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Withstands high surge stresses
• Minimal changes of voltage versus current as
   specified by voltage regulation (∆VZ)
• High specified maximum current (IZM) when
   adequately heat sunk
• Moisture classification is Level 1 per IPC/JEDEC 
   J-STD-020B with no dry pack required