P/N + Описание + Поиск контента

UPS Communications Cable Smart Signalling 15 / 4.5m

UPS Communications Cable Simple Signalling - USB to RJ45

[APC Schnelder Electric]

APC Smart-UPS SC, 390 Watts / 620 VA,Input 230V / Output 230V, Interface Port DB-9 RS-232

Includes: CD with software, Smart UPS Signalling RS-232 Cable, User Manual

Standard Lead Time: Usually in Stock

DESCRIPTION
The Smart Position Sensor, 75 mm linear configuration, is a non-contacting sensing solution for linear absolute position sensing with enhanced speed and accuracy. It senses the position of a magnet relative to the sensor from 0 mm to 75 mm [0 in to 3.0 in].

FEATURES
• Resolution of up to 16 bits provides enhanced accuracy
• Non-contacting technology can provide enhanced product
   life and durability with less downtime
• Combined patented MR sensor and ASIC technology
   provide enhanced differentiation and performance
• Air gap of up to 3,0 ±2,5 mm [0.118 ±0.098 in] between
   sensor and magnet expands application opportunities
• Other output options (CAN bus, RS232) available upon
   request
• Self-diagnostics feature can reduce equipment downtime
• Small size, taking up less space than most competitive
   technologies, allows for use where space is at a premium
• IP67 and IP69K sealing allow use in a variety of harsh
   applications
• RoHS-compliant materials meet Directive 2002/95/EC

POTENTIAL APPLICATIONS
Aerospace:
• Aircraft ram door position

Medical:
• Syringe pumps

Industrial:
• Cutting and slitting machinery
• Elevator level position
• Material handling
• Packaging
• Plastic molding machines
• Valve position
• Wafer handling equipment
• Woodworking machinery

Description
This MICROSPACE® PCI/104-Express expansion card is equipped with four frame grabber controllers (BT878) which are directly connected to the PCI/104-Express bus over a PCI to PCIe bridge. This design allows simultaneous input of up to 4x 30 frames per second. Since each frame grabber has a 4 channel multiplexer available, a maximum of 16 video cameras can be connected.

Features
• 4x Frame grabber BT878 (with PCIe/PCI Bridge)
• Up to 16 cameras
• PCI Express-Bus
• Banwidth for sim. capturing 3x PAL/NTSC
   resolution
• PCI-104 Pass Through Connector

Description
The SAM4CP series belongs to Atmel® │Smart energy portfolio. It is based on SAM4C, a high performance 32-bit, dual core ARM® Cortex®-M4 RISC processor embedding a PRIME PLC [Power Line Communication] modem. The cores are able to operate at a maximum speed of 120 MHz, featuring 1 Mbyte of embedded Flash, 128 kBytes of SRAM and on-chip cache for each core.
SAM4CP unique dual ARM Cortex-M4 architecture supports implementation of signal processing, application and Communications firmware in independent partitions. SAM4CP16B system-on-chip includes a PRIME modem, being PRIME [PoweR line Intelligent Metering Evolution] an open standard technology used for Smart Grid applications, mainly Smart Metering. Atmel PRIME modem implementation includes enhanced PHY layer features such as additional robust modes and frequency band extension.

Features
● Application/Master Core (CM4P0)
   ● ARM Cortex-M4 running at up to 120 MHz(1)
   ● Memory Protection Unit (MPU)
   ● DSP Instruction
   ● Thumb®-2 instruction set
   ● Instruction and Data Cache Controller with 2 Kbytes Cache Memory
   ● Memories
      ● 1024 Kbytes of Embedded Flash for Program Code (I-Code bus) and Program Data
         (D-Code bus)
         with Built-in ECC (2-bit error detection and 1-bit correction per 128 bits)
      ● 128 Kbytes of Embedded SRAM (SRAM0) for Program Data (System bus)
      ● 8 Kbytes of ROM with embedded boot loader routines (UART) and In-Application
         Programming (IAP) routines
● Co-processor (CM4P1), provides ability to separate application, communication or metrology
   functions
   ● ARM Cortex-M4F running at up to 120 MHz
   ● IEEE® 754 Compliant, Single precision Floating-Point Unit (FPU)
   ● DSP Instruction
   ● Thumb-2 instruction set
   ● Instruction and Data Cache Controller with 2 Kbytes Cache Memory
   ● Memories
      ● 16 Kbytes of Embedded SRAM (SRAM1) for Program Code (I-Code bus) and
         Program Data (D-Code bus and System bus)
      ● 8 Kbytes of Embedded SRAM (SRAM2) for Program Data (System bus)
● Symmetrical/Asynchronous Dual Core Architecture
   ● Interrupt-based Interprocessor Communication
   ● Asynchronous Clocking
   ● One Interrupt Controller (NVIC) for each core
   ● Each Peripheral IRQ routed to each NVIC Input
● Cryptography
   ● High-performance AES 128 to 256 with various modes
      (GCM, CBC, ECB, CFB, CBC-MAC, CTR)
   ● TRNG (up to 38 Mbit/s stream, with tested Diehard and FIPS)
   ● Classical Public Key Crypto accelerator and associated ROM library
      for RSA, ECC, DSA, ECDSA
   ● Integrity Check Module (ICM) based on Secure Hash Algorithm
      (SHA1, SHA224, SHA256), DMA assisted
● Safety
   ● 4 Physical Anti-tamper Detection I/O with Time Stamping and Immediate Clear
      of General Backup Registers
   ● Security bit for Device Protection from JTAG accesses
● Shared System Controller
   ● Power Supply
      ● Embedded Core and LCD Voltage Regulator for single supply operation
      ● Power-on-Reset (POR), Brownout Detector (BOD) and Watchdog for safe operation
      ● Low Power Sleep and Backup modes
   ● Clock
      ● 3 to 20 MHz Quartz or ceramic resonator oscillators with Clock Failure Detection
      ● Optional low-power 32.768 kHz crystal oscillator for RTC
      ● High precision 4/8/12 MHz factory trimmed internal RC oscillator
         with on-the-fly trimming capability
      ● One High Frequency PLL up to 240 MHz, One 8 MHz PLL with internal 32 kHz input,
         as source for High Frequency PLL
      ● Low power Slow Clock Internal RC oscillator as permanent clock (Continue ...)

Presentation
   UPS management SmartSlot Card which supports the UPSLink protocol for SMT, SMX and SURTD Smart-UPS.

Presentation
   Accessory solutions to tailor the Smart-UPS to meet your specific needs.

[Telemecanique]

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies - Screw clamp terminal connections

Control and Signalling units Ø 22
Harmony® XB4, metal
Light blocks - “Test light” - Protection

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies - Spring terminal connections

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies for printed circuit board

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies - Faston connectors

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies - Plug-in connector

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies + light blocks with integral LED

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies + light blocks with integral LED

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/light assemblies for pilot lights with integral LED

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/light assemblies for pilot lights with integral LED

Control and Signalling units Ø 22
Harmony® XB4, metal
Body/contact assemblies + light blocks with BA 9s base fitting

Control and Signalling units Ø 22
Harmony® XB4, metal
Light bodies for pilot lights with BA 9s base fitting

The 33790 is a dual channel physical layer interface IC for the Distributed System Interface (DSI) bus. It is designed to meet automotive requirements. It can also be used in non automotive applications. It supports bidirectional communication between slave and master ICs. Some slave devices derive a regulated 5.0 V from the bus, which can be used to power sensors, thereby eliminating the need for additional circuitry and wiring.

Features

Two Independent DSI Compatible Buses

Pinout Matched to MC68HC55 (SPI to DSI Logic)

Wave-Shaped Bus Output Voltage

Independent Thermal Shutdown and Current Limit

Return Signalling Current Detection

Internal Logic Input Pull UPS and Pull downs

On-Board Charge Pump

2.0 kV ESD Capability

Communications RateUp to 150 kbps

Pb-Free Packaging Designated by Suffix Code EG